How To Change Battery In Honda Key Fob 2019

How To Change Battery In Honda Key Fob 2019

Purchasing a Honda vehicle is a wise investment, but with it comes the responsibility of maintaining it in the best possible condition. The Honda key fob is a vital component of the vehicle that allows for convenient access, as well as starting the engine. Often, the batteries powering the key fob will lose their power after extended usage, causing the fob to stop working entirely.

Fortunately, changing the Honda Key Fob battery is a simple process–– a step-by-step procedure that even non-mechanics can easily follow. In this article, we will guide you through the precise steps to replace the battery in your Honda Key Fob, and answer some of the most frequently asked questions.

See also  how long to cook pork shoulder at 350

The Process of Changing Honda Key Fob Battery

The process of changing the Honda key fob battery is relatively quick and straightforward, requiring only a few minutes from start to finish. Below are the step-by-step instructions you can follow to change your battery:

Step 1: Confirm the Type of Honda Key Fob

Before changing the battery of your Honda Key Fob, first, confirm the type of the fob in question, so you know what kind of battery is required. Honda generally uses two types of key fobs; one with an integrated metal key and the other without.

Step 2: Gather the Tools Necessary for the Task

Although changing the battery of the Honda key fob is an easy process, you will require specific tools to complete the task. In this case, the necessary tools include a replacement battery (CR2032), a flathead screwdriver and a clean cloth.

Step 3: Removing the Metal Key (if applicable)

If your Honda key fob features a built-in metal key, remove it before you proceed with changing the battery. This can be done by sliding the tiny lever on the outer portion of the key and then gently moving the key out of the fob.

Step 4: Access the Internal Battery Compartment

You can access the internal battery compartment of the key fob by pressing the release button on the back of the fob. This will enable you to pull apart the two halves of the fob with ease.

Step 5: Remove the Dead Battery

The dead battery can be easily removed from the key fob by gently prying it out with a flathead screwdriver. In some models, the battery may be located in a small tray that you can slide out.

See also  How To Connect Wii To Roku Smart Tv

Step 6: Replace The Battery

Once you’ve removed the dead battery, it’s time to replace it with the new one. The new battery must be placed in the same position as the dead battery, with the (+) sign facing upwards.

Step 7: Re-Assemble the Key Fob

After you’ve replaced the battery, gently replace the key fob cover, paying close attention to the way it’s fitted. Ensure that the cover snaps back tightly into place, securing the new battery in position.

Step 8: Restore the Metal Key (if applicable)

If your Honda key fob features a built-in metal key, reinsert it by aligning it in the key fob socket and then sliding the metal key back into place.

Frequently Asked Questions (FAQs)

1. How often should I change the battery in my Honda Key fob?

The interval at which you replace the battery in your Honda key fob depends on the amount of usage it gets. However, batteries typically last two to three years, so it’s essential to change them in that interval.

2. What should I do if changing the Honda key fob battery doesn’t solve the problem?

If after changing the battery in your Honda key fob, it still doesn’t work, reset the fob by pressing any button on the key fob while holding the lock/release buttons simultaneously.

3. What happens if my Honda key fob gets wet?

To prevent corrosion, it’s best to dry the Honda key fob if it gets wet. If you suspect moisture has gotten inside the fob, open the fob, check for moisture and dry off with a clean cloth. Replace the battery, reassemble the fob, and test it again.

See also  how long does it take for orbeez to grow

4. How can I increase the lifespan of my Honda key fob battery?

Limit usage of the key fob buttons to when it is necessary, this precaution will prevent accidentally triggering the buttons, and thus saving the battery from premature drain. Where possible, it is advisable to also store the fob and the metal key separately, to prevent accidental button press.

In a nutshell, changing a Honda key fob battery is a simple, but essential task that requires minimal setup and skills. Replacing the battery in your Honda key fob requires specific tools, such as a flathead screwdriver and a clean cloth. By following the step-by-step instructions listed above, you can replace the battery in your Honda key fob in minutes. Remember, it’s advisable to change key fob batteries periodically, depending on usage, and be certain to reset the fob if it still doesn’t work after changing the battery. By doing this, you can enjoy a functional and reliable Honda key fob for years to come.

Leave a Comment