How To Program Genie Garage Door Opener Model 7055

Programming Your Genie Garage Door Opener Model 7055

Genie garage door openers have been a popular choice for homeowners and businesses for years. One of the most popular models is the Genie Garage Door Opener Model 7055. This model offers a range of features and benefits, making it an excellent option for those looking for a reliable and durable garage door opener. However, it can be intimidating to program your new garage door opener. Follow the steps outlined in this article, and you will have your Genie Garage Door Opener Model 7055 programmed and ready to use in no time.

Step One: Clear the Memory

The first step to programming your Genie Garage Door Opener Model 7055 is to clear the memory. This will ensure that any old codes or previous programming is cleared, and you can start fresh. To clear the memory, follow the steps below:

1. Press and hold the program button on the garage door opener for about 10 seconds.
2. The LED light on the garage door opener will blink twice and then turn off. This indicates that the memory has been cleared.

Step Two: Program the Remote

The next step is to program the remote that comes with your Genie Garage Door Opener Model 7055. The remote will allow you to open and close the garage door from outside the garage. Follow the steps below to program the remote:

1. Press and hold the “learn” button on the garage door opener for about 10 seconds. This button is located on the side of the opener.
2. The LED light on the garage door opener will blink, indicating that it is in programming mode.
3. Press the button on the remote that you want to program.
4. The LED light on the garage door opener will blink again, indicating that the programming was successful.
5. Test the remote by pressing the programmed button.

See also  how to solve trace on cool math games

Repeat this process to program additional remotes.

Step Three: Program the Keypad

The keypad is another option for opening and closing your garage door. It is a convenient option for those who do not want to carry a remote with them. To program the keypad, follow the steps below:

1. Press and hold the “learn” button on the garage door opener for about 10 seconds.
2. The LED light on the garage door opener will blink, indicating that it is in programming mode.
3. Enter the PIN number you want to use on the keypad.
4. Press the “enter” button on the keypad.
5. The LED light on the garage door opener will blink again, indicating that the programming was successful.
6. Test the keypad by entering the PIN number you programmed and pressing the “enter” button.

Repeat this process to program additional PIN numbers on the keypad.

Step Four: Program the HomeLink System

If your vehicle has a built-in HomeLink system, you can program it to work with your Genie Garage Door Opener Model 7055. The HomeLink system allows you to open and close your garage door without needing a remote or keypad. To program the HomeLink system, follow the steps below:

1. Press and hold the “learn” button on the garage door opener for about 10 seconds.
2. The LED light on the garage door opener will blink, indicating that it is in programming mode.
3. Press the “program” button on the HomeLink system in your vehicle. This button is usually located on the overhead console or visor.
4. The LED light on the garage door opener will blink again, indicating that the programming was successful.
5. Test the HomeLink system by pressing the programmed button.

See also  How To Fix Your Led Light Remote If It Stops Working

FAQs

1. How do I reset my Genie Garage Door Opener Model 7055?

To reset your Genie Garage Door Opener Model 7055, follow the steps below:

1. Unplug the garage door opener from the power source.
2. Wait at least 30 seconds.
3. Plug the garage door opener back in.
4. Test the garage door opener to ensure it is working correctly.

2. How many remotes can I program to my Genie Garage Door Opener Model 7055?

You can program up to three remotes to your Genie Garage Door Opener Model 7055.

3. Can I program my Genie Garage Door Opener Model 7055 to work with my smartphone?

Yes, you can. Genie offers a smartphone app that allows you to control your garage door opener from your phone. You will need to purchase the Genie Aladdin Connect device to use the app.

4. How do I change the battery in my Genie Garage Door Opener Model 7055 remote?

To change the battery in your Genie Garage Door Opener Model 7055 remote, follow the steps below:

1. Slide the battery cover off the back of the remote.
2. Remove the old battery and insert a new one.
3. Slide the battery cover back onto the remote.

In conclusion, programming your Genie Garage Door Opener Model 7055 may seem daunting at first, but it is a simple process when you follow the steps outlined above. With your new garage door opener programmed and ready to use, you can enjoy the convenience and security it provides.

Leave a Comment