How To Program Genie Garage Door Opener To Car
If you have a Genie garage door opener, you may want to program it to work with your car’s built-in garage door opener. This is a convenient feature that allows you to open and close your garage door without having to get out of your car. Here is a step-by-step guide on how to program your Genie garage door opener to your car.
Step 1: Check your car’s manual
Before you start the programming process, you should check your car’s manual to ensure that it is equipped with a built-in garage door opener. This feature is only available in certain makes and models of cars. If your car does not have a built-in garage door opener, you will not be able to use this feature.
Step 2: Clear the memory of the Genie garage door opener
Before you can program your Genie garage door opener to your car, you need to clear the memory of the opener. This will ensure that there are no existing codes that could interfere with the programming process.
To clear the memory of your Genie garage door opener, follow these steps:
1. Locate the “Learn” button on your Genie garage door opener. This button is usually located on the back of the opener.
2. Press and hold the “Learn” button until the LED light on the opener turns off. This usually takes about 6 seconds.
3. Release the “Learn” button.
Your Genie garage door opener’s memory is now cleared and ready for programming.
Step 3: Put your car in programming mode
To program your car’s built-in garage door opener to your Genie garage door opener, you need to put your car in programming mode. The steps for doing this vary depending on the make and model of your car. Here are some general steps:
1. Turn on the ignition of your car.
2. Press and hold the button for your car’s built-in garage door opener. This button is usually located on the roof console or the driver’s side sun visor.
3. While holding the button, watch for the LED light on your car’s built-in garage door opener to start flashing. This usually takes about 10-20 seconds.
4. Release the button.
Your car is now in programming mode and ready to receive the programming code from your Genie garage door opener.
Step 4: Program the Genie garage door opener to your car
Now that your car is in programming mode and your Genie garage door opener’s memory is cleared, you can start programming your Genie garage door opener to your car.
To do this, follow these steps:
1. Locate the “Learn” button on your Genie garage door opener.
2. Press and release the “Learn” button. The LED light on the opener will start flashing.
3. Within 30 seconds of pressing the “Learn” button, press and hold the button for your car’s built-in garage door opener. Hold the button until the LED light on the Genie garage door opener stops flashing and stays on.
4. Release the button for your car’s built-in garage door opener.
5. Push the button again and hold it until the garage door starts to move. This will confirm that your car’s built-in garage door opener has been programmed to your Genie garage door opener.
Step 5: Test the programming
Once you have programmed your Genie garage door opener to your car, you should test the programming to ensure that it works properly. To do this, simply press the button for your car’s built-in garage door opener while you are in range of your garage door. If the garage door opens, the programming was successful.
FAQs
Q: Can I program my Genie garage door opener to multiple cars?
A: Yes, you can program your Genie garage door opener to multiple cars. Simply repeat the programming process for each car.
Q: How do I know if my car has a built-in garage door opener?
A: You can check your car’s manual to see if it is equipped with a built-in garage door opener. If you are still unsure, contact the manufacturer for more information.
Q: What do I do if the programming process does not work?
A: If the programming process does not work, try clearing the memory of your Genie garage door opener and starting the programming process again. If you are still having trouble, contact Genie customer service for assistance.
In conclusion, programming your Genie garage door opener to your car is a convenient feature that can save you time and hassle. By following the steps outlined in this guide, you can easily program your Genie garage door opener to your car and start enjoying the benefits of this feature. If you have any further questions or concerns, refer to the FAQs section or contact Genie customer service for assistance.